Woodwind

 

All keys are removed in order to properly clean the wood of clarinets, flutes, saxophones, oboes etc. with suitable materials.
The keys will be disassembled and polished to a high-gloss finish. The original padding and cork is replaced with new ones and adapted to fit the instrument.
All joints will be lubricated before the instrument undergoes final testing.
The keys can be adapted or custom-build to best fit your fingers.

 

Brass winds - General repair

 

Lacquered instruments will be disassembled and treated in a solvent bath, then they will be thoroughly cleaned with water both inside and out.
All dings and dents will be repaired; broken parts will be replaced with original spare parts. Finally, the instrument will be soldered together and tuned. Following a primary polishing, the instrument will be cleaned by hand and finally machine-polished to a high-gloss finish. Before the instrument will be lacquered, it will be thoroughly degreased.
All mechanical parts will be precisely polished, lubricated and fine-tuned

 

Mechanical repairs

 

The mechanical parts will be disassembled, the slides removed and cleaned inside. The cylinders will be honed and lubricated after a thorough cleansing and fitted into the housing. Everything will be precisely adjusted and tested.
We repair mouthpieces and have them gold- or silver-plated.